Skip to main content

Wide Contemporary

Wide Rectangular Space

This large multi-function space serves worship, conferences, and other musical events.

This larger space requires a larger array to focus sound over a longer distance. Equally important, the higher directivity minimizes amplified sound striking surfaces other than the audience to preserve music and speech clarity. The Side and Top views above show a main line array of (7) IV6-1122's that provide much of the coverage to the entire space. Two smaller curved arrays of (3) IV6-1122/15's cover the forward left and right audience spaces. Subwoofers are shown flown vertically stacked behind the main array to deliver coherent bass summation and extension. The elevated position consumes less floor space and bass covers more evenly. They can also be distributed evenly along the perimeter of the platform.
Six (6) IV6-1122/05 and one (1) IV6-1122/15 (Main array)
The main array covers the center. rear and part of the side seating. 
 
Three (3) IV6-1122/15 (x Two)
(Symmetrical right and left forward audience coverage)
One tightly curved array on either side focused on the outside 
forward congregational areas. 
 
Four (4) IV6-118S (Deep bass
Vertically flown behind the main array.

Technical Considerations

Amplified Loudspeaker Controllers

Community recommends our series of Amplified Loudspeaker Controllers (ALC) for all Community loudspeaker applications, like those shown in this application guide. ALCs provide all of the signal routing, zone switching, DSP processing, protective limiting, remote monitoring, and amplification functions needed between a mixer and the loudspeakers in virtually any Community Professional Loudspeakers application. Standard Ethernet communication protocols allow for fast system design, system control, and remote system monitoring. Analog and Dante® inputs are included in each model, for quick and easy integration into any new or existing system. Community-authored loudspeaker presets include equalization, high pass filters, and multi-stage limiters tailored to each model, ensuring consistent sound quality and full loudspeaker protection in every application.

ALC Application Note

Total available power can be safely distributed asymmetrically across the outputs in any combination of low impedance and 70V/100V loads.  Power delivered from each output is individually managed; total shared power per ALC is monitored and limited independently by the power supply.

ALC-404D

4 inputs (Analog and/or Dante®)

4 channels of amplification and DSP processing

Each channel provides up to 400W of power into low impedance or 70V/100V loads, stable to 2Ω

In bridged mode, each pair of channels provides up to 800W into 8Ω, 4Ω, or 70V/100V loads

Total shared power not to exceed 1200W

Perfect for Small R SERIES, V SERIES, Compact I SERIES, W SERIES (W2), and ENT200 models, and zoned C SERIES & D SERIES applications

ALC-1604D

4 inputs (Analog and/or Dante®)

4 channels of amplification and DSP processing

Each channel provides up to 1600W of power into low impedance or 70V/100V loads, stable to 2Ω

In bridged mode, each pair of channels provides up to 3200W into 4Ω, or 70V/100V loads

Total shared power not to exceed 4800W

Perfect match for Larger R SERIES & W SERIES, I SERIES, IV6 and ENT-FR

ALC-3202D

2 inputs (Analog and/or Dante®)

2 channels of amplification and DSP processing

Each channel provides up to 3200W of power into low impedance or 70V/100V loads

In bridged mode, each pair of channels provides up to 6400W into 4Ω, or 70V/100V loads

Total shared power not to exceed 6400W

Perfect for R6-MAX, I SERIES Subwoofers and larger IV6 Arrays

 

Technical Information 

For power and full technical information refer to ALC spec sheets

For full DSP Settings/Tunings visit, here

 

Technical Support

Visit www.communitypro.com to learn more, or contact the Community TAG Team (Technical Applications Group) for technical and applications assistance at 1+ (610) 876-3400 or tagteam@communitypro.com

 

Design Guide

The House of Worship Design Guide can be downloaded, here.

 

*Dante® is a registered trademark of Audinate Pty Ltd.