Skip to main content

D SERIES

DP8

8-inch High Output High Quality Two-Way Pendant
Type
Pendant Loudspeakers

The DP8 is a high performance 8-inch pendant loudspeakers designed for open architecture spaces or any location where a stylish pendant form factor is desired. Featuring high power handling, higher sensitivity and realistic sound reproduction, the DP8 is the more focused big brother to the DP6. D SERIES pendant loudspeakers can be used in a wide variety of speech and music applications. They are equipped with a built-in autoformer, supporting low impedance or 70V/100V operation. Uniform voicing means that the DP8 can be combined with other ceiling and surface mount models in the C or D SERIES family without compromising consistency from zone to zone. The genuine coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry-leading sensitivity, thereby permitting 3 dB to 6 dB greater output level while requiring half the amplification power of competing products. An easy-access selector switch is conveniently located on the face of the loudspeaker for selectable 8 ohm or 70V/100V operation, while an integrated rear cover hides all wiring and hanging hardware for an aesthetically pleasing installation.

  • Finish: Black or white paintable ABS matte plastic, dual-layer powder-coated steel grille
  • Nominal Beamwidth (H x V): 115° Conical
  • 70V/100V Autoformer: 120W, 60W, 30W, 15W (@70V only)
  • Continuous Max Output: 117 dB (123 dB Peak)
  • Power Handling: 150W continuous @ 8 ohms
  • Operating Range: 60Hz – 22 kHz
  • Sensitivity (1W/1m): 95 dB
  • Dimensions (H x Dia): 17.7" x 13.4" (450 x 341 mm)
  • Transducers: LF -1 x 8”, HF - 1 x 1.25” exit compression driver
PSC
Pendant Speed Clamp
PHK-50
Pendant Hang Kit (50 Feet)
PHK-30
Pendant Hang Kit (30 Feet)
PST-14
Pendant Split Loom Tubing (14 Feet)